Mastering the Art of Effortless Fires

Starting a fire is an art, and we have truly mastered it. With our premium fire starters and handpicked wood, igniting a fire becomes a seamless experience. Our expert techniques ensure a clean, smokeless burn, transforming your fire pit moments into warm, memorable gatherings.

Pre-Steps: Pls open the legs of the fire pit and place it on any flat surface. Clean the ash from the ashpan if it was used earlier and put it back in the fire pit. Remove the flame ring from the pit and follow the below steps

Step1: Place 2 logs horizontally on the ashpan, then place 2 logs on top of them to form a square with slightly extended edges.

Step2: For a 15" Radiance fire pit, use 4 segments of the fire starter (2 segments of 2), light it with the USB lighter or match stick, and place them inside the square and at the center of the ashpan.

Step3:. Add 4-5 small pieces of bamboo kindling that came with your wood.

Step4:  Add another 4 logs in the same square fashion over the top of the existing logs.

Step5: Place 4 more logs on the outer edges of the square, slightly tilted towards the center.

Step6: Place the flame ring back on top of the fire pit.

Step7: The bamboo kindling will help the logs catch fire, allowing you to sit back and relax.

Step8: In about 5-10 minutes, you'll see a very efficient primary burn. In another 5-10 minutes, you'll experience secondary burn and near smokeless-ness.

Step9: Enjoy the bonfire! Add 3-4 logs every 15-20 minutes to maintain the primary and secondary flames, ensuring warmth around the fire pit with your friends and family.

Once the session is over, let the fire pit burn out on its own. Never use water to put out the fire, it can permanently damage your fire pit.